Comparison of the characteristics and advantages of frp and pc solar panels

Release time:

2024-08-15

When choosing a daylighting board, FRP daylighting board and PC daylighting board each have their own advantages and applicable scenarios.

When choosing a daylighting board, FRP daylighting board and PC daylighting board each have their own advantages and applicable scenarios.The following are their main differences and characteristics：

Characteristics and advantages of FRP daylighting board：
Mechanical properties and waterproof properties: FRP lighting board has good mechanical strength and low coefficient of thermal expansion, so the deformation caused by thermal expansion and cold shrinkage is small, and the connection joints have good waterproof performance.‌
Anti-aging properties: The surface of the FRP daylighting board is coated with an anti-ultraviolet film, which can isolate ultraviolet rays by more than 99%, and its service life can reach at least 15 years, and it can actually reach more than 20 years.‌
Light transmittance and daylighting performance: The light transmittance of FRP daylighting panels is 85%, which is suitable for daylighting in winter while avoiding excessive sunlight in summer.
Features and advantages of PC sunshine board：
Light transmittance and lighting performance: The light transmittance of PC solar panels can reach 90%, which provides good natural light, but it will be too hot and dazzling in summer, and special design is required to avoid direct sunlight.‌
Weather resistance and UV resistance: PC solar panels have good weather resistance and can resist ULTRAVIOLET radiation and bad weather, but their UV resistance is not as good as FRP solar panels.
Impact resistance: PC solar panels have excellent impact resistance and are the most impact resistant among thermoplastics.‌
Application scenario recommendations：
Occasions where high mechanical strength and good waterproof performance are required: such as roof daylighting belts, daylighting skylights and daylighting ventilators for large steel-structure industrial plants, FRP daylighting panels are a better choice.
Occasions that require high light transmittance and excellent sound insulation: such as greenhouses, exhibition halls and other places that require a lot of natural light, PC sun panels are more suitable.
In summary, the choice of FRP daylighting board or PC daylighting board depends on the specific application requirements and environmental conditions.FRP daylighting panels perform better in terms of mechanical strength, waterproof performance and anti-aging, and are suitable for occasions that require high durability and low maintenance costs; while PC daylighting panels have more advantages in terms of light transmittance and impact resistance, and are suitable for occasions that require high light and safety protection.